Toggle sidebar

gegen check der SMART Werte

O

ottosykora

Benutzer
Mitglied seit
17. Apr 2013
Beiträge
8.993
Punkte für Reaktionen
1.203
Punkte
288
kann bitt ejemand noch einen Gegencheck machen?
Keine Ahnung was da nicht gut sein soll, heute wurde die RS vorgefunden piepend, die Platte 1 hat sich aus dem Speicherpool verabschiedet, aber ich sehe da keinen Grund dazu. Jetzt ist alles am repair
Note es sind 'original' Syno Platten drin


Code: 
smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     HAT3300
Device Model:     Synology HAT3300-8T
Serial Number:    ZPV01BPY
LU WWN Device Id: 5 000c50 0e6db5d93
Firmware Version: PL01
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Dec  9 11:39:21 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 897) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x70bd)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Error_Rate                                                   0x000f   100   064   006    Pre-fail  Always       -       0
  3 Spin_Up_Time                                                     0x0003   092   091   000    Pre-fail  Always       -       0
  4 Start/Stop_Count                                                 0x0032   100   100   020    Old_age   Always       -       16
  5 Reallocated_Sector_Ct                                            0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x000f   079   060   045    Pre-fail  Always       -       73321583
  9 Power_On_Hours                                                   0x0032   088   088   000    Old_age   Always       -       11211
 10 Spin_Retry_Count                                                 0x0013   100   100   097    Pre-fail  Always       -       0
 12 Drive_Power_Cycle_Count                                          0x0032   100   100   020    Old_age   Always       -       15
183 PHY_Counter_Events                                               0x0032   100   100   000    Old_age   Always       -       0
184 Reported_IOEDC_Errors                                            0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrectables                                          0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeouts                                                 0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes                                                  0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature                                              0x0022   056   053   040    Old_age   Always       -       44 (Min/Max 42/44)
191 Shock_Count                                                      0x0032   100   100   000    Old_age   Always       -       0
192 Emergency_Retract_Count                                          0x0032   100   100   000    Old_age   Always       -       435
193 Load/Unload_Count                                                0x0032   100   100   000    Old_age   Always       -       483
194 Temperature                                                      0x0022   044   047   000    Old_age   Always       -       44 (0 28 0 0 0)
195 ECC_On_the_Fly_Count                                             0x001a   100   064   000    Old_age   Always       -       0
197 Current_Pending_Sector                                           0x0012   100   100   000    Old_age   Always       -       0
198 Uncorrectable_Sectors_Count                                      0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flight_Hours                                                0x0000   100   253   000    Old_age   Offline      -       120959163968445
241 Lifetime_Writes_From_host                                        0x0000   100   253   000    Old_age   Offline      -       8803191934
242 Lifetime_Reads_From_Host                                         0x0000   100   253   000    Old_age   Offline      -       207783658030

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     HAT3300
Device Model:     Synology HAT3300-8T
Serial Number:    ZPV01BQB
LU WWN Device Id: 5 000c50 0e6db5f17
Firmware Version: PL01
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Dec  9 11:39:21 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 899) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x70bd)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Error_Rate                                                   0x000f   082   064   006    Pre-fail  Always       -       160724566
  3 Spin_Up_Time                                                     0x0003   092   091   000    Pre-fail  Always       -       0
  4 Start/Stop_Count                                                 0x0032   100   100   020    Old_age   Always       -       15
  5 Reallocated_Sector_Ct                                            0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x000f   079   060   045    Pre-fail  Always       -       73556817
  9 Power_On_Hours                                                   0x0032   088   088   000    Old_age   Always       -       11211
 10 Spin_Retry_Count                                                 0x0013   100   100   097    Pre-fail  Always       -       0
 12 Drive_Power_Cycle_Count                                          0x0032   100   100   020    Old_age   Always       -       15
183 PHY_Counter_Events                                               0x0032   100   100   000    Old_age   Always       -       0
184 Reported_IOEDC_Errors                                            0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrectables                                          0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeouts                                                 0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes                                                  0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature                                              0x0022   059   055   040    Old_age   Always       -       41 (Min/Max 40/41)
191 Shock_Count                                                      0x0032   100   100   000    Old_age   Always       -       0
192 Emergency_Retract_Count                                          0x0032   100   100   000    Old_age   Always       -       433
193 Load/Unload_Count                                                0x0032   100   100   000    Old_age   Always       -       485
194 Temperature                                                      0x0022   041   045   000    Old_age   Always       -       41 (0 28 0 0 0)
195 ECC_On_the_Fly_Count                                             0x001a   082   064   000    Old_age   Always       -       160724566
197 Current_Pending_Sector                                           0x0012   100   100   000    Old_age   Always       -       0
198 Uncorrectable_Sectors_Count                                      0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flight_Hours                                                0x0000   100   253   000    Old_age   Offline      -       145247204027325
241 Lifetime_Writes_From_host                                        0x0000   100   253   000    Old_age   Offline      -       24436596928
242 Lifetime_Reads_From_Host                                         0x0000   100   253   000    Old_age   Offline      -       179285569776

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     HAT3300
Device Model:     Synology HAT3300-8T
Serial Number:    ZPV01E70
LU WWN Device Id: 5 000c50 0e6cfa16d
Firmware Version: PL01
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Dec  9 11:39:22 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 897) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x70bd)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Error_Rate                                                   0x000f   079   064   006    Pre-fail  Always       -       76823779
  3 Spin_Up_Time                                                     0x0003   092   091   000    Pre-fail  Always       -       0
  4 Start/Stop_Count                                                 0x0032   100   100   020    Old_age   Always       -       17
  5 Reallocated_Sector_Ct                                            0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x000f   079   060   045    Pre-fail  Always       -       73473429
  9 Power_On_Hours                                                   0x0032   088   088   000    Old_age   Always       -       11211
 10 Spin_Retry_Count                                                 0x0013   100   100   097    Pre-fail  Always       -       0
 12 Drive_Power_Cycle_Count                                          0x0032   100   100   020    Old_age   Always       -       16
183 PHY_Counter_Events                                               0x0032   100   100   000    Old_age   Always       -       0
184 Reported_IOEDC_Errors                                            0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrectables                                          0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeouts                                                 0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes                                                  0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature                                              0x0022   060   056   040    Old_age   Always       -       40 (Min/Max 35/40)
191 Shock_Count                                                      0x0032   100   100   000    Old_age   Always       -       0
192 Emergency_Retract_Count                                          0x0032   100   100   000    Old_age   Always       -       438
193 Load/Unload_Count                                                0x0032   100   100   000    Old_age   Always       -       484
194 Temperature                                                      0x0022   040   044   000    Old_age   Always       -       40 (0 28 0 0 0)
195 ECC_On_the_Fly_Count                                             0x001a   079   064   000    Old_age   Always       -       76823779
197 Current_Pending_Sector                                           0x0012   100   100   000    Old_age   Always       -       0
198 Uncorrectable_Sectors_Count                                      0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flight_Hours                                                0x0000   100   253   000    Old_age   Offline      -       111286897617853
241 Lifetime_Writes_From_host                                        0x0000   100   253   000    Old_age   Offline      -       9005255022
242 Lifetime_Reads_From_Host                                         0x0000   100   253   000    Old_age   Offline      -       181933685696

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     HAT3300
Device Model:     Synology HAT3300-8T
Serial Number:    ZPV01BPT
LU WWN Device Id: 5 000c50 0e6db5571
Firmware Version: PL01
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Dec  9 11:39:22 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 905) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x70bd)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Error_Rate                                                   0x000f   071   064   006    Pre-fail  Always       -       13055901
  3 Spin_Up_Time                                                     0x0003   092   091   000    Pre-fail  Always       -       0
  4 Start/Stop_Count                                                 0x0032   100   100   020    Old_age   Always       -       17
  5 Reallocated_Sector_Ct                                            0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x000f   079   060   045    Pre-fail  Always       -       73345553
  9 Power_On_Hours                                                   0x0032   088   088   000    Old_age   Always       -       11211
 10 Spin_Retry_Count                                                 0x0013   100   100   097    Pre-fail  Always       -       0
 12 Drive_Power_Cycle_Count                                          0x0032   100   100   020    Old_age   Always       -       16
183 PHY_Counter_Events                                               0x0032   100   100   000    Old_age   Always       -       0
184 Reported_IOEDC_Errors                                            0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrectables                                          0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeouts                                                 0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes                                                  0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature                                              0x0022   057   054   040    Old_age   Always       -       43 (Min/Max 42/43)
191 Shock_Count                                                      0x0032   100   100   000    Old_age   Always       -       0
192 Emergency_Retract_Count                                          0x0032   100   100   000    Old_age   Always       -       435
193 Load/Unload_Count                                                0x0032   100   100   000    Old_age   Always       -       483
194 Temperature                                                      0x0022   043   046   000    Old_age   Always       -       43 (0 28 0 0 0)
195 ECC_On_the_Fly_Count                                             0x001a   071   064   000    Old_age   Always       -       13055901
197 Current_Pending_Sector                                           0x0012   100   100   000    Old_age   Always       -       0
198 Uncorrectable_Sectors_Count                                      0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flight_Hours                                                0x0000   100   253   000    Old_age   Offline      -       189055870446525
241 Lifetime_Writes_From_host                                        0x0000   100   253   000    Old_age   Offline      -       8818386492
242 Lifetime_Reads_From_Host                                         0x0000   100   253   000    Old_age   Offline      -       203519421140

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
B

Benares

Benutzer
Sehr erfahren
Mitglied seit
27. Sep 2008
Beiträge
14.057
Punkte für Reaktionen
3.871
Punkte
488
Mmh, wirklich schwer zu sagen, zumal die erste, im Vergleich zu den anderen, die ID1 sogar auf 0 hat. Oder muss man Werte, ähnlich wie bei Seagate, erst umrechnen? :unsure: Ich dachte immer, die Synology-Disks seien umgelabelte Toshibas.
 
O

ottosykora

Benutzer
Mitglied seit
17. Apr 2013
Beiträge
8.993
Punkte für Reaktionen
1.203
Punkte
288
ja, das bei hd1 ist merkwürdig. Die war heute auch aus dem Pool und RS hat gepiept

jetzt bin ich am repair, keine Ahnung wie lange es noch gene wird, vielleicht 10h?

Ja, eigentlich dachte ich auch es sind Toshi
die müssen eigentlich alle gleich sein, das haben wir mit den Platten und ram und was auch immer zusammen gekauft
 
V

vater

Benutzer
Contributor
Mitglied seit
14. Mrz 2014
Beiträge
490
Punkte für Reaktionen
107
Punkte
43
Ich würde ein Ticket mit dem Support File eröffnen. Irgendwo wird ja stehen, warum die HDD das RAID “verlassen” hat. Gerade bei der Verwendung von Syno Platten darf man ja wohl auf aussagefähige Logs hoffen - jedenfalls auf Hinweise durch den Support.
Ich drücke die Daumen, dass der Rebuild störungsfrei durchläuft.
 
ctrlaltdelete

ctrlaltdelete

Benutzer
Contributor
Sehr erfahren
Maintainer
Mitglied seit
30. Dez 2012
Beiträge
14.030
Punkte für Reaktionen
6.048
Punkte
569
Stationary

Stationary

Benutzer
Sehr erfahren
Mitglied seit
13. Feb 2017
Beiträge
3.970
Punkte für Reaktionen
1.278
Punkte
194
ottosykora schrieb:
Ja, eigentlich dachte ich auch es sind Toshi
Zum Vergrößern anklicken....
Die 5300er Serie ist Toshiba Enterprise basiert.
Deine ist eine 3300er HDD, das sind Seagate Ironwolf.

(Quelle: “Synology hat gegenüber ComputerBase inzwischen bestätigt, dass die technische Basis der neuen Laufwerke der HAT3300-Serie die Seagate IronWolf sind. Bei der HAT5300-Enterprise-Serie werden HDDs von Toshiba genutzt.”)
 
  • Like
Reaktionen: ottosykora und ctrlaltdelete
O

ottosykora

Benutzer
Mitglied seit
17. Apr 2013
Beiträge
8.993
Punkte für Reaktionen
1.203
Punkte
288
OK danke für Info!


Data scrubbing

ach so , habe gerade gesehen, dass wohl jetzt wie schon letztenmal schedule für data scrubbing war

vermute nun dies hat diese Panne ausgelöst

eigentlich wird data scrubbing empfohlen, aber wenn das solches Drama jedesmal macht, ist es nicht besonders nützlich.

Wie habt ihr es so mit dem scrubbing?
 
Stationary

Stationary

Benutzer
Sehr erfahren
Mitglied seit
13. Feb 2017
Beiträge
3.970
Punkte für Reaktionen
1.278
Punkte
194
Ist bei mir abgeschaltet. Ich habe vor einem Jahr mal eines manuell angestoßen, aber regelmäßig mache ich das nicht.
 
  • Like
Reaktionen: ottosykora
O

ottosykora

Benutzer
Mitglied seit
17. Apr 2013
Beiträge
8.993
Punkte für Reaktionen
1.203
Punkte
288
aha!
dann werde ich es vielleicht auch so machen

nur dann ausführen, wenn ich auch Zeit habe mich mit den Fehlern zu beschäftigen
 
O

ottosykora

Benutzer
Mitglied seit
17. Apr 2013
Beiträge
8.993
Punkte für Reaktionen
1.203
Punkte
288
...und was sehe ich da, bei der anderen RS822+ habe ich es eigentlich schon abgeschaltet, vermutlich hatte ich da auch Ärger und es geht auch ohne.
(es sind 2 gleiche Syno mit vPN und ShareSync)

bei der von heute werde ich es wohl versuchen durchlaufen zu lassen, weil wenn ich es stoppe, dann gibt es eine Warnung dass mein System nicht konsistent ist oder so was.

Wenn fertig, wird zumindest schedule abgestellt.
 
NAS-Central - Ihr Partner für NAS Lösungen
NAS-Central - The Home of NAS
 

Kaffeautomat

Wenn du das Forum hilfreich findest oder uns unterstützen möchtest, dann gib uns doch einfach einen Kaffee aus.

Als Dankeschön schalten wir deinen Account werbefrei.

:coffee:

Hier gehts zum Kaffeeautomat 

Hosted by netcup
IT Lösungen mit NAS Servern
IT Firma Trier
Fotograf Trier
   
Oben Unten
Zurück