Installation von ipkg auf dem DS211+

[cccc]

Hallo

Ich habe ipkg, wie folgt auf dem DS211+ (DSM 4.3-3776-2) installiert:

> cat /proc/cpuinfo
Processor       : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS        : 1589.24
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
CPU revision    : 1

Hardware        : Synology 6282 board
Revision        : 0000
Serial          : 0000000000000000

> cd /volume1/@tmp
> wget http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/syno-mvkw-bootstrap_1.2-7_arm.xsh

> chmod +x syno-mvkw-bootstrap_1.2-7_arm.xsh
> ./syno-mvkw-bootstrap_1.2-7_arm.xsh
Optware Bootstrap for syno-mvkw.
Extracting archive... please wait
bootstrap/
bootstrap/bootstrap.sh
bootstrap/ipkg-opt.ipk
bootstrap/ipkg.sh
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
1232+1 records in
1232+1 records out
Error: CPU not Marvell Kirkwood, probably wrong bootstrap.xsh


BusyBox v1.16.1 (2013-08-17 12:13:34 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

> ipkg update
/bin/sh: ipkg: not found
> find / -name ipkg
>

und funktioniert nicht.

Error: CPU not Marvell Kirkwood, probably wrong bootstrap.xsh?

Ich habe aber gemäss:

What kind of CPU does my NAS have

DS211+ Marvell Kirkwood mv6282 1.6Ghz ARM (Marvell ARMADA 300) 16-bit@DDR3, 512MB of RAM

und

How_to_install_ipkg

installiert.

 

[cccc]

Ich habe jetzt zum Laufen gebracht.

Musste bootstrap.sh gemäss:

http://www.synology-wiki.de/index.php/IPKG

anpassen:

> cd /volume1/@tmp
ls
bootstrap                          syno-mvkw-bootstrap_1.2-7_arm.xsh
> cd bootstrap
> ls
bootstrap.sh           ipkg.sh                wget.ipk
ipkg-opt.ipk           optware-bootstrap.ipk

> vi bootstrap.sh
    echo "  rm -rf /usr/lib/ipkg"
    echo "This will remove all existing optware packages."
    echo
    echo "You must *reboot* and then restart the bootstrap script."
    exit 1
fi

if [ ! -e `dirname $REAL_OPT_DIR` ]; then
    echo "Error: `dirname $REAL_OPT_DIR` does not exist"
    exit 2
fi

if ! grep Feroceon /proc/cpuinfo >/dev/null 2>&1; then
    echo "Error: CPU not Marvell Kirkwood, probably wrong bootstrap.xsh"
    exit 3
fi



BS_DIR="$REAL_OPT_DIR/ipkg-bootstrap"

echo "Creating temporary ipkg repository..."
rm -rf $BS_DIR
DiskStation> ls
bootstrap.sh           ipkg.sh                wget.ipk
ipkg-opt.ipk           optware-bootstrap.ipk

> ./bootstrap.sh
Creating temporary ipkg repository...
Installing optware-bootstrap package...
Unpacking optware-bootstrap.ipk...Done.
Configuring optware-bootstrap.ipk...Done.
Installing ipkg...
Unpacking ipkg-opt.ipk...Done.
Configuring ipkg-opt.ipk...WARNING: can't open config file: /usr/syno/ssl/openssl.cnf
Done.
Removing temporary ipkg repository...
Installing wget...
Installing wget (1.12-2) to root...
Configuring wget
Successfully terminated.
Creating /opt/etc/ipkg/cross-feed.conf...
Setup complete.

> ipkg update
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/Packages.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/Packages.gz
Updated list of available packages in /opt/lib/ipkg/lists/cross
Successfully terminated.

und jetzt scheint zu funktionieren.!