Hardware der Synology Stations: Unterschied zwischen den Versionen
Aus Synology Wiki
imported>Dil88 DS416 un DS216play ergänzt |
imported>Dil88 DS216se ergänzt |
||
Zeile 63: | Zeile 63: | ||
! rowspan="3" |Marvell ARMADA ARMv7 | ! rowspan="3" |Marvell ARMADA ARMv7 | ||
||[http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf ARMADA 370 (1C/1T)] | ||[http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf ARMADA 370 (1C/1T)] | ||
||DS114<br>DS115j<br>DS213j<br>DS214se<br>DS414slim<br>EDS14<br>RS214 | ||DS114<br>DS115j<br>DS213j<br>DS214se<br>DS216se<br>DS414slim<br>EDS14<br>RS214 | ||
||1.2GHz<br>800MHz<br>1.2GHz<br>800MHz<br>1.2GHz<br>1.2GHz<br>1.2GHz | ||1.2GHz<br>800MHz<br>1.2GHz<br>800MHz<br>800MHz<br>1.2GHz<br>1.2GHz<br>1.2GHz | ||
||16bit@DDR3 | ||16bit@DDR3 | ||
||Yes | ||Yes | ||
||512MB<br>256MB<br>512MB<br>256MB<br>512MB<br>512MB<br>512MB | ||512MB<br>256MB<br>512MB<br>256MB<br>256MB<br>512MB<br>512MB<br>512MB | ||
|| | || | ||
|| | || |
Version vom 8. Oktober 2015, 12:50 Uhr
CPU-Architektur | CPU-Typ | CPU-Modell (Cores/Threads) | DS/RS-Modelle | Takt | BUS | FPU | RAM | BIOS | Optware-Pfad | Linux *) | MI / II **) | Passmark CPU-Mark |
---|---|---|---|---|---|---|---|---|---|---|---|---|
ARM | ARM (armv5b) | FW IXP420 BB | DS101 DS101j |
266MHz | @133 | 64MB 32MB |
? | |||||
Marvell Feroceon ARMv5TE compliant (armv5tejl) | 88f5281 | DS107+ DS207+ CS407 RS407 |
500MHz | 32bit@DDR333 | Yes | 128MB 128MB 128MB 128MB |
ds107+ ds107+ |
syno-x07 IPKG |
942: 2.6.15 844: 2.6.15 |
1.5 / 2.0 | ? | |
Marvell Kirkwood ARMv5TE compliant (Feroceon® family) | 88F6180 | USB Station 2 | 800MHz | 16bit@DDR400 | No | 128MB | cs08q1armel IPKG via inofficial Firmware |
1417: 2.6.32 | ? | |||
88F6281 | DS109 DS110j DS112j DS209 DS210j DS211j DS212j DS409 DS409slim DS410j DS411j RS409 |
1.2GHz 800MHz 1.0GHz 1.2GHz 800MHz 1.2GHz 1.2GHz 1.2GHz 1.2GHz 800MHz 1.2GHz 1.2GHz |
16bit@DDR800 | No | 128MB 128MB 128MB 256MB 128MB 128MB 256MB 256MB 128MB 128MB 256MB 128MB |
cs08q1armel IPKG |
1139: 2.6.24 1342: 2.6.32 |
? | ||||
88F6282 | DS111 DS112 DS211 DS211+ DS212 DS213air DS411slim DS413j RS212 |
1.6GHz | 16bit@DDR3-1066 | No | 256MB 256MB 256MB 512MB 256MB 256MB 512MB 512MB 256MB |
cs08q1armel IPKG |
2.6.32 | 4.6/6.4 | ? | |||
88FR131 | DS112+ DS212+ DS213 DS411 |
2.0GHz | DDR3 | No | 512MB | 1944: 2.6.32 | ? | |||||
Marvell ARMADA ARMv7 | ARMADA 370 (1C/1T) | DS114 DS115j DS213j DS214se DS216se DS414slim EDS14 RS214 |
1.2GHz 800MHz 1.2GHz 800MHz 800MHz 1.2GHz 1.2GHz 1.2GHz |
16bit@DDR3 | Yes | 512MB 256MB 512MB 256MB 256MB 512MB 512MB 512MB |
3.2.40 | ? | ||||
ARMADA 375 (2C/2T) | DS115 DS215J |
800MHz | DDR3 | Yes | 512MB | 3.2.40 | ? | |||||
ARMADA XP (2C/2T) | DS214 DS214+ DS414 RS814 RS815 |
1.066GHz 1.33GHz 1.33GHz 1.33GHz 1.33GHz |
DDR3 | Yes | 512MB 1GB 1GB 1GB 1GB |
3.2.40 | ? | |||||
Mindspeed Comcerto 2000 ARMv7 | C2200 (2C/2T) | DS414j | 1.2GHz | DDR3 | Yes | 512MB | 3.2.40 | ? | ||||
Annapurna Labs Alpine ARMv7 (armv7l) | AL-212 (2C/2T) | DS215+ DS416 |
1.4GHz | DDR3 | Yes | 1GB | 3.2.40 | ? | ||||
AL-314 (4C/4T) | DS715 DS1515 |
1.4GHz | DDR3 | Yes | 2GB | 3.2.40 | ? | |||||
AL-514 (4C/4T) | DS2015xs | 1.7GHz | DDR3 | Yes | 4GB | ds2015xs (unofficial) IPKG Compile Packages |
||||||
STM Monaco ARM | STiH412 (2C/2T) | DS216play | 1.5GHz | DDR3 | Yes | 1024MB | 3.2.40 | ? | ||||
PowerPC | Freescale PowerPC (ppc_6xx) | MPC8241 powerpc |
DS101g+ DS106e DS106 DS106x DS107 DS107e DS109j DS207 DS207.128 DS209j DS406e CS407e |
266MHz | 32bit@133 | Yes | 64MB 32MB 64MB 128MB 64MB 32MB 32MB 64MB 128MB 64MB 64MB 64MB |
ds106 ds106 ds106 ds107 ds207 ds207 ds406 |
ds101g IPKG |
942: 2.4.22 942: 2.4.22 942: 2.4.22 942: 2.4.22 942: 2.4.22 942: 2.4.22 |
? | |
MPC8241 powerpc |
DS106j DS108j |
200MHz | 32bit@133 | Yes | 32MB 32MB |
ds106 |
ds101g IPKG |
942: 2.4.22 942: 2.4.22 |
? | |||
MPC8245 powerpc |
CS406 RS406 |
400MHz | 128MB 128MB |
ds406 |
ds101g IPKG |
? | ||||||
Freescale PowerPC (e500v*) | MPC8533 ppc853x |
DS109+ DS209+II DS409+ DS509+ RS409(RP)+ |
1.067GHz | 64bit@DDR533 | Yes | 512MB 512MB 512MB 1GB 1GB |
ds508 |
syno-e500 IPKG |
957: 2.6.24 | 4.9 / 5.5 | ? | |
MPC8533 ppc854x |
DS209+ DS408 DS508 RS408(RP) |
800MHz | 64bit@DDR533 | Yes | 512MB 512MB 512MB 512MB |
syno-e500 IPKG kernel-module |
957: 2.6.24 | 3.4 / 4.1 | ? | |||
MPC8533e ppc853x |
DS110+ DS210+ DS410 |
1.067GHz | 64bit@DDR533 | Yes | 512MB 512MB 512MB |
? | syno-e500 IPKG |
957: 2.6.24 | ? | ? | ||
P1022 QorIQ (2C/2T) |
DS213+ DS413 |
1.067GHz | 64bit@DDR533 | Yes | 512MB 1GB |
? | syno-e500 IPKG |
2.6.32.12 (#2636 SMP) | ? | ? | ||
x86-32 | Intel Atom | CE5335 (2C/4T) | DS214play DS415play |
1.6GHz | 64bit@DDR3-800 | Yes | 1GB | syno-i686 IPKG |
||||
x86-64 | Intel Atom | D410 (1C/2T) | DS710+ | 1.67GHz | 64bit@DDR2-800 | Yes | 1GB | syno-i686 IPKG |
2.6.32.12 (#2166 SMP) | 339 | ||
D510 (2C/4T) | DS411+ DS1010+ RS810(RP)+ |
1.67GHz | 64bit@DDR2-800 | Yes | 1GB 1-3GB 1-3GB |
syno-i686 IPKG |
2.6.32.12 (#1613) | 658 | ||||
D525 (2C/4T) | DS411+II DS1511+ RS2211+ DS2411+ |
1.8GHz | 64bit@DDR2-800 | Yes | 1GB 1-3GB 1-3GB 1-3GB |
syno-i686 IPKG |
715 | |||||
D425 (1C/2T) | DS712+ | 1.8GHz | 64bit@DDR3-800 | Yes | 1GB | syno-i686 IPKG |
312 | |||||
D2700 (2C/4T) | DS713+ DS412+ DS1512+ DS1812+ DS1513+ DS1813+ DS2413+ RS814(RP)+ RS2414(RP)+ |
2.13GHz | 64bit@DDR3-800 | Yes | 1-4GB 1-4GB 1-4GB 1-4GB 2-4GB 2-4GB 2-4GB 2-4GB 2-4GB |
syno-i686 IPKG |
819 | |||||
C2538 (4C/4T) | DS415+ DS1515+ DS1815+ DS2415+ RS815(RP)+ RS2416(RP)+ |
2.4GHz | 64bit@DDR3-1600 | Yes | 2-8GB 2-16GB 2-16GB 2-16GB 2-16GB 2-16GB |
syno-i686 IPKG |
2.329 | |||||
Intel Core i3 | i3-2100 (2C/4T) | DS3611xs RS3411xs RS3411(RP)xs |
3.1GHz | 64bit@DDR3-1333 ECC | Yes | 2-8GB | 1944: 2.6.32 | 3.856 |
*) bezogen auf die DS-Firmware-Version (uname -a) **) BYTEmark MI := Memory Index II := Integer Index Baseline (LINUX) AMD K6/233 (je höher der Wert, desto performanter) ***) Dual Core CPU
cpuinfo, Memory, Serien-Nummer, …
cpuinfo
Mit dem Kommando cat /proc/cpuinfo kann man sich anzeigen lassen, welcher Prozessor in der Synology Station verbaut ist. Die Ausgabe sieht ungefähr so aus:
Processor : ARM926EJ-Sid(wb) rev 0 (v5l) BogoMIPS : 499.71 Features : swp half thumb fastmult vfp edsp CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 0 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 32768 I assoc : 1 I line length : 32 I sets : 1024 D size : 32768 D assoc : 4 D line length : 32 D sets : 256
Oder man bekommt folgende Anzeige:
processor : 0 cpu : e500v2 clock : 1066.560000MHz revision : 2.2 (pvr 8021 0022) bogomips : 133.12 timebase : 66660000 platform : MPC8544 DS Vendor : Freescale Semiconductor PVR : 0x80210022 SVR : 0x80340011 PLL setting : 0x4 Memory : 512 MB
In diesem Fall auf die Seite des Herstellers (in dieser Anzeige Freescale Semiconductor) gehen und die Prozessortype suchen, die sich hinter der Bezeichnung "platform" verbirgt.
In diesem Bsp. handelt es sich um einen Power PC Prozessor der Type MPC8544 DS der Firma Freescale Semiconductor. Dazu passt also das Package für den Power Prozessor mit der Bezeichnung MPC85XX. so
Hardware : MV-88fxx81 Revision : 0000 Serial : 0000000000000000
Serien-Nummer
Die Serien-Nummer kann man sich mit cat /proc/sys/kernel/syno_serial anzeigen lassen:
xxxxxxx> cat /proc/sys/kernel/syno_serial 94G3N00147
Memory
xxxxxxx> fgrep MemTotal /proc/meminfo …