Code:
root@LeanNAS:~# sudo smartctl -ia -d sat /dev/sata1
smartctl 6.5 (build date Sep 26 2022) [aarch64-linux-5.10.55+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (CMR)
Device Model: WDC WD40EFPX-68C6CN0
Serial Number: WD-WXK2D337LAJL
LU WWN Device Id: 5 0014ee 26b0ce9f8
Firmware Version: 81.00A81
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jan 1 19:28:56 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 427) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 195 051 Pre-fail Always - 33
3 Spin_Up_Time 0x0027 208 206 021 Pre-fail Always - 2566
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2884
5 Reallocated_Sector_Ct 0x0033 195 195 140 Pre-fail Always - 233
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2261
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2803
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 5
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7537
194 Temperature_Celsius 0x0022 121 112 000 Old_age Always - 26
196 Reallocated_Event_Count 0x0032 176 176 000 Old_age Always - 24
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2259 -
# 2 Short offline Completed without error 00% 2252 -
# 3 Short offline Completed without error 00% 2251 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
root@LeanNAS:~# smartctl -ia -d sat /dev/sata2
smartctl 6.5 (build date Sep 26 2022) [aarch64-linux-5.10.55+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST4000VN006-3CW104
Serial Number: ZW60RTEV
LU WWN Device Id: 5 000c50 0e6ea3f91
Firmware Version: SC60
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jan 1 19:30:45 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 40) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 460) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 050 006 Pre-fail Always - 869288
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2875
5 Reallocated_Sector_Ct 0x0033 093 093 010 Pre-fail Always - 11488
7 Seek_Error_Rate 0x000f 071 060 045 Pre-fail Always - 11429672
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2253
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2796
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 2078
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 68720525328
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 070 061 040 Old_age Always - 30 (Min/Max 27/33)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2899
194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 100 064 000 Old_age Always - 869288
197 Current_Pending_Sector 0x0012 096 095 000 Old_age Always - 1568
198 Offline_Uncorrectable 0x0010 096 095 000 Old_age Offline - 1568
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2245 (94 127 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10833182314
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7388987380
SMART Error Log Version: 1
ATA Error Count: 2078 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2078 occurred at disk power-on lifetime: 2198 hours (91 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 01:20:30.345 READ FPDMA QUEUED
60 00 08 88 4a 8f 40 00 01:20:30.345 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 01:20:30.262 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:20:30.260 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:20:30.260 SET FEATURES [Set transfer mode]
Error 2077 occurred at disk power-on lifetime: 2198 hours (91 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 ff ff ff 4f 00 01:20:30.124 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:20:30.034 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:20:29.988 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:20:29.879 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 01:20:29.777 READ FPDMA QUEUED
Error 2076 occurred at disk power-on lifetime: 2171 hours (90 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 f8 4a 8f 40 00 04:33:39.050 READ FPDMA QUEUED
60 00 18 c8 4a 8f 40 00 04:33:39.050 READ FPDMA QUEUED
60 00 28 78 4a 8f 40 00 04:33:39.050 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 04:33:39.050 READ FPDMA QUEUED
60 00 10 c0 5f 06 41 00 04:33:39.050 READ FPDMA QUEUED
Error 2075 occurred at disk power-on lifetime: 2171 hours (90 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 04:33:38.828 READ FPDMA QUEUED
60 00 18 ff ff ff 4f 00 04:33:38.741 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 04:33:38.736 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 04:33:38.731 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 04:33:38.731 READ FPDMA QUEUED
Error 2074 occurred at disk power-on lifetime: 1997 hours (83 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 01:02:02.243 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 01:02:02.160 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:02:02.159 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:02:02.158 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:02:02.158 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 80% 2251 -
# 2 Short offline Interrupted (host reset) 50% 2244 -
# 3 Short offline Interrupted (host reset) 40% 2243 -
# 4 Short offline Interrupted (host reset) 50% 2243 -
# 5 Short offline Interrupted (host reset) 60% 2243 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
