DS918+ startet nicht mehr und gibt keine serielle Ausgabe

[DaveR]

The Insyde is empty on both of mine as well. But the EFI folder contains:

EFI/boot/SynoBootLoader.conf
EFI/boot/SynoBootLoader.efi
Insyde/

SynoBootLoader.conf and SynoBootLoader.efi are different on both my Synology NAS that use efi.

Your missing SynoBootLoader.conf would probably look like this:

syno_serial --pci=0,24,2 --speed=115200 --uppci=0,24,0 --upspeed=115200
terminal_input serial
terminal_output serial
set default='1'
set timeout='3'
set fallback='0'

menuentry "SYNOLOGY_1" {
    search --fs-uuid --no-floppy --set=root 10EE-589C
    linux /zImage root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS918+ vender_format_version=2 synoboot1
    initrd /rd.gz
}
menuentry "SYNOLOGY_2" {
    search --fs-uuid --no-floppy --set=root 45E5B07D-4783-4867-A369-F99C0CD1E610
    cksum /grub_cksum.syno
    turns /turns -s
    linux /zImage root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS918+ vender_format_version=2 synoboot2
    initrd /rd.gz
}

Someone with a DS918+ (or DS1019+ or DS718+) could give you a copy of their synoboot1
sudo dd if=/dev/synoboot1 of=/volume1/MYSHAREDFOLDER/synoboot1.img

They'd need to change "MYSHAREDFOLDER" to a shared folder on their DS918+.

 

[DaveR]

copy 4 files from the original firmware package

Partition 1 (synoboot1) contains boot files from the DSM version that the NAS originally arrived with. Which would be DSM 6.1.3-15152 for a DS918+ (although I suspect files from any later version would work.

Partition 2 (synoboot2) contains boot files from the currently installed DSM version (and should be the same or newer than what is installed on your HDDs, if you don't want to lose your data).

 

[alex3025]

Someone with a DS918+ (or DS1019+ or DS718+) could give you a copy of their synoboot1
sudo dd if=/dev/synoboot1 of=/volume1/MYSHAREDFOLDER/synoboot1.img

They'd need to change "MYSHAREDFOLDER" to a shared folder on their DS918+.

Someone would be that kind to share its synoboot1 data?

 

[DaveR]

Here's a SynoBootLoader.conf for a DS918+

I'm looking for a SynoBootLoader..efi

 

[Adama]

Just read it, here my SynoBootLoader.efi from my 918+ with actual DSM 7.2:

 

[DaveR]

@Adama

Can you provide the SynoBootLoader.conf too?

The one I provided I edited a DS718+ SynoBootLoader.conf to suit a DS918+ and I'm not sure mine is 100% correct.

 

[Adama]

Of course, didn't thought it would be necessary...

Here it comes:

 

[alex3025]

@Adama would you be so kind to provide also the DSM files in the synoboot1 partition? (zImage, GRUB... etc..)

 

[Adama]

Na klar / Of course...

Ich hätte lieber gleich das Image anhängen sollen...

 

[Benares]

Frage am Rande: Wie kommt man an diese Dateien? Nur über die serielle Konsole?

 

[Adama]

Someone with a DS918+ (or DS1019+ or DS718+) could give you a copy of their synoboot1
sudo dd if=/dev/synoboot1 of=/volume1/MYSHAREDFOLDER/synoboot1.img

Das hatte Dave beschrieben, also simpel über SSH...

Das Image kannst du dann einfach mit 7-zip z.B. öffnen...

 

[DaveR]

Thanks @Adama

The DS918+ SynoBootLoader.conf that I created from a DS218+ was perfect. I amaze myself some times