SMART-Werte auslesen und interpretieren

[ctrlaltdelete]

Da ich ja jetzt auch Seagate HDDs habe, nutze ich folgenden Eintrag im Aufgabenplaner, der rechnet die Werte direkt um:
smartctl -iA -v 1,raw48:54 -v 7,raw48:54 /dev/sata1

 

[Benie]

Wie schaut die Ausgabe dann aus?
Poster doch bitte mal einen Screenshot davon.

Sollte man dem Thread SMART Werte auslesen hinzuzufügen. Kann das auch ein anderer Maintainer oder nur Patrick? Als Ersteller?

 

[ctrlaltdelete]

Das kann nur der Ersteller, wieso?
Edit: Ah, jetzt, ja, weil @plang.pl Pause macht, ich frage mal die Mods

smartctl -iA -v 1,raw48:54 -v 7,raw48:54 /dev/sata1

=== START OF INFORMATION SECTION ===
Device Model:     ST12000NM0127
Serial Number:    ZJV3VQG9
LU WWN Device Id: 5 000c50 0b4d0b20c
Firmware Version: G006
User Capacity:    12,000,138,625,024 bytes [12.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Nov 15 14:58:06 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate                                              0x000f   074   064   044    Pre-fail  Always       -       0
  3 Spin_Up_Time                                                     0x0003   090   090   000    Pre-fail  Always       -       0
  4 Start_Stop_Count                                                 0x0032   100   100   020    Old_age   Always       -       28
  5 Reallocated_Sector_Ct                                            0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x000f   074   060   045    Pre-fail  Always       -       0
  9 Power_On_Hours                                                   0x0032   100   100   000    Old_age   Always       -       406
 10 Spin_Retry_Count                                                 0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count                                                0x0032   100   100   020    Old_age   Always       -       2
184 End-to-End_Error                                                 0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect                                               0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout                                                  0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel                                          0x0022   064   061   040    Old_age   Always       -       36 (Min/Max 31/37)
192 Power-Off_Retract_Count                                          0x0032   100   100   000    Old_age   Always       -       10
193 Load_Cycle_Count                                                 0x0032   100   100   000    Old_age   Always       -       41
194 Temperature_Celsius                                              0x0022   036   040   000    Old_age   Always       -       36 (0 21 0 0 0)
195 Hardware_ECC_Recovered                                           0x001a   007   005   000    Old_age   Always       -       22873769
197 Current_Pending_Sector                                           0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable                                            0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate                                            0x0023   100   100   001    Pre-fail  Always       -       0
240 Head_Flying_Hours                                                0x0000   100   253   000    Old_age   Offline      -       390 (162 138 0)
241 Total_LBAs_Written                                               0x0000   100   253   000    Old_age   Offline      -       10669145319
242 Total_LBAs_Read                                                  0x0000   100   253   000    Old_age   Offline      -       37792749252

smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Edit: Ziemlich cool oder?

 

[Benie]

Schaut gut aus

Weil ich das gut fände, weil so auf Dauer bei den Posts der SMART Werte vielleicht nicht mehr umgerechnet werden müssten, da die Leute das gleich selbst umsetzen können.

 

[ctrlaltdelete]

Habe es bei den Mods angefragt, per Melden Funktion, mal sehen ob es klappt.

 

[ctrlaltdelete]

Habe ID195 auch noch mit reingenommen und es im Startpost ergänzt!
Befehl für Seagate HDDs mit automatischer Umrechnung ID: 1/7/195

smartctl -iA -v 1,raw48:54 -v 7,raw48:54 -v 195,raw48:54 /dev/sata1

=== START OF INFORMATION SECTION ===
Device Model:     ST12000NM0127
Serial Number:    ZJV3VQG9
LU WWN Device Id: 5 000c50 0b4d0b20c
Firmware Version: G006
User Capacity:    12,000,138,625,024 bytes [12.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Nov 16 09:47:41 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate                                              0x000f   082   064   044    Pre-fail  Always       -       0
  3 Spin_Up_Time                                                     0x0003   090   090   000    Pre-fail  Always       -       0
  4 Start_Stop_Count                                                 0x0032   100   100   020    Old_age   Always       -       28
  5 Reallocated_Sector_Ct                                            0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x000f   075   060   045    Pre-fail  Always       -       0
  9 Power_On_Hours                                                   0x0032   100   100   000    Old_age   Always       -       425
 10 Spin_Retry_Count                                                 0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count                                                0x0032   100   100   020    Old_age   Always       -       2
184 End-to-End_Error                                                 0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect                                               0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout                                                  0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel                                          0x0022   064   061   040    Old_age   Always       -       36 (Min/Max 31/37)
192 Power-Off_Retract_Count                                          0x0032   100   100   000    Old_age   Always       -       10
193 Load_Cycle_Count                                                 0x0032   100   100   000    Old_age   Always       -       41
194 Temperature_Celsius                                              0x0022   036   040   000    Old_age   Always       -       36 (0 21 0 0 0)
195 Hardware_ECC_Recovered                                           0x001a   007   005   000    Old_age   Always       -       0
197 Current_Pending_Sector                                           0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable                                            0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate                                            0x0023   100   100   001    Pre-fail  Always       -       0
240 Head_Flying_Hours                                                0x0000   100   253   000    Old_age   Offline      -       408 (28 81 0)
241 Total_LBAs_Written                                               0x0000   100   253   000    Old_age   Offline      -       10738990286
242 Total_LBAs_Read                                                  0x0000   100   253   000    Old_age   Offline      -       42266817196

smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)

 

[ElaCorp]

Ich hab gemerkt, dass man die Egrebnisse toll bei ChatGPT reinladen kann. Der erklärt einem die einzelnen AUffälligkeiten. Udn wenn man das Monate danahc nochmal macht, Sagt er auch was zum verlauf. Super Genial. !!